Monday 17 October 2011

HELIO CDAW-2

HELIO CDAW-2 will take place on 24-26 October in Trieste at ICTP. Last updates can be found at http://www.helio-vo.eu/helio-cdaw/HELIO_CDAW-2.html.

Wednesday 7 September 2011

HELIO CDAW-2

The second HELIO Coordinated Data Analysis Workshop (CDAW) will be held in October 2011 at the ICTP in Trieste, Italy. The goal of the workshop is to exercise the HELIO infrastructure based on a selection of use cases and verify of the functionality of the services and their level of integration. Feedback from the CDAW will help us identify what improvements and developments are required for HELIO capabilities.
More information about both the scientific goals and the registation/meeting information are available here.

Saturday 16 April 2011

HELIO SolarSoft Updates

The IDL code used to access HELIO code was loaded into the SolarSoft tree on 15 April 2011.

The Crib Sheet showing how to use the code is included in the distribution and can also be found here

Update: 16 April 2011

The widget to access the ICS from the hio_setup object is now more or less complete; it should have a functionality similar to that of the Web-based ICS GUI. In addition, the return from the widget is filtered so that only instruments that are also present in the Provider Access Table (PAT) of the DPAS are returned.

Updates following CDAW-1

Following the HELIO CDAW-1 the ICS GUI and related documentation have been updated. The SolarSoft IDL code that can be used to access HELIO has also been released.

The ordering of the text and check boxes on the page has been switched and notes have been included in the help text indicating that the check boxes act as constraints on the selection – all instruments are selected if none are checked – and the ICS show all instruments that could be included in HELIO.

The SolarSoft IDL code can be used to identify interesting events, select instruments of interest, retrieve the list of URLs to files that meet the crireia and the optionally retrieve the files.

Sunday 10 April 2011

HEC Basic Information

The following links provide basic information on the Heliophysics Event Catalogue, such as:
More information will be added as long as the service will evolve and will be used for specific use cases.

Thursday 7 April 2011

CDAW 1 - Local Information

Dear CDAW Participants,

We look forward to welcoming you to TCD next week for HELIO CDAW1. Below are some local details related to the meeting:

1. Getting to TCD


The easiest way of getting to TCD from the airport is by bus or taxi.
DublinBus operates from/to the airport with a direct service (buses 747 or 748 for ~6 euros per way) or a few normal city service (considerably slower but cheaper: 2.30 euros).


TCD is within a 10 min walk of both company's city centre bus stops.

2. Workshop Location


Breakout sessions will be help in the FitzGerald Library and the in the SNIAM Building, which is connected to the FitzGerland Building by a walkway.

3. Wireless Access

If your institution supports eduroam, you can log into the TCD wireless network using this service.

For those who do not have eduroam, we will provide wireless accounts that can be used throughout campus. There will also be 2 iMacs with guest user access.

4. Workshop Dinner/Commons

Each evening, the Fellows and Scholars of the College meet for an evening meal called Commons. On Tuesday evening we will be joining them in the Dining Hall

We will meet at 18:00 in the lobby of the Dining Hall. Don't be late as the doors are locked at 18:15!

5. Lunch

Lunch will be provided on Tuesday and Wednesday at 13:00-14:00 in the Cafe Ballroom Space of the National Gallery of Ireland. The Cafe is located at the Clare Street entrance of the National Gallery, which is 5 minute walk from the the Fitzgerald Building. Clare Street is located at the bottom right of the College map.

That's all for now!!

Best regards,

LOC:
Peter Gallagher
David Pérez-Suárez
Paul Higgins
Shaun Bloomfield


SOME PICTURES FROM CDAW 1 by Alessandro Marassi



Monday 4 April 2011

Refactoring of the Heliophysics Event Catalogue

In preparation of the CDAW-1, the Heliophysics Event Catalogue has undergone a major refactoring.

In particular, a new GUI has been developed to make easier and more intuitive the use of the service, and a significant re-arrangement of the naming of the tables and the fields of the tables has been carried out, following a series of discussions on the metadata features.

The new GUI can be accessed here .

The scheme of the refactored tables and field names is available here .

Please notice that minor tweakings are in progress, and the relevant information is being dynamically updated.

Wednesday 23 March 2011

Work on the DPAS

We are experimenting with the way that the Data Provider Access Service (DPAS) access the CDAW and you may experience problems with some instruments.

Normal service will be resumed as soon as possible.

Changes to the HELIO Services

I've added the test interface for Context Service (CXS) – this allows the user to experiment with the service that provides context information for the HELIO Front End (HFE). The following plots can currently be made:
  • GOES light curve for a selected a time range
  • Plot of location of flares on a context image for 3 days up to s selected time
We have also reloaded the Instrument Location Service (ILS). The Service now includes the trajectories of more spacecraft and has a greater selection of coordinate systems – HCI, HEE amd Carrington longitude.

Wednesday 16 March 2011

Context Service

The Context Service is used to generate different types of plots that are used by the HELIO Front End (HFE) to assist the user. Currently the CXS generates plots of GOES light-curves and solar images over-plotted with the location of flares; the plots are generated on demand.

To use the CXS select the time range of interest and the type of plot required and then press "Send Request". The image should appear on the page after a few seconds.

Questions: Would you like to see other types of context information produced by the CXS? If so, please let us know.

This interface is under development. We are examining ways of speeding up the generation of the plots.

Unified Observing Catalogue

The Unified Observing Catalogue is used in two different ways and the types of information associated with these are quite different:
  1. For (remote-sensing) instruments that observe the Sun with restricted fields-of-view, the UOC contains information about the observations and make it possible to filter data requests based on whether the instrument was observing the required target.
  2. Where there are problems accessing the observations from some instruments – either because not all of them are on-line or because of complexities in the archive interface – the UOC contains the details of what is available and the URLs that should be used to access the data.
Entries in the UOC in the first category are used as part of the search process. Those in the second category are used by the DPAS in order to support access to certain instruments – that the DPAS should use the UOC is specified in the Provider Access Table (PAT).

To access the UOC select the time range of interest and the required instrument and then press "Send Request". The results can be viewed as a Web page or downloaded as a VOTable or text file.

Questions: For the pointed solar instruments, does the UOC contain the required information? If there are any problems, please let us know.

This interface is still under development.

Data Provider Access Service

The Data Provider Access Service provides integrated access to observations from a number of data archives and observatories. To date the DPAS supports access to more than 150 instruments from more than 40 observatories.

The DPAS is intended to isolate the user from the foibles of the providers and supports many access protocols, including http, ftp, Web Services, etc.

To use the DPAS select the time range of interest and one of more instruments and then press "Search". The results can be viewed as a Web-based table or viewed or downloaded as a VOTable file.

Questions: Is the DPAS working in the way that you expect? Does the list of instruments that it finds for the time interval you selected meet your expectations? If there are any problems, please let us know.

Instrument Location Service

The Instrument Location Service contains details of the locations of all main planetary objects in the solar system and of spacecraft that have travelled on a complex trajectory.

The ILS also contains a table of the dates of key events in the life of several spacecraft including launch, planetary flybys and insertion into orbit around the target object.

To use the ILS, select the time range of interest and the object (or objects) of interest and then press "Search". The results can be viewed as a Web page or downloaded as a VOTable or text file.

Questions: Does the ILS produce the information that you expect? Do you see any errors in the Service? If there are any problems, please let us know.

Instrument Capabilities Service

The Instrument Capabilities Service describes the types of observations that can be made by more than 200 instruments. The ICS also holds information that describe the characteristics of the associated observatories.

To use the
ICS, select the time range of interest and one or more parameters that help define the type of observations that you are interested in and then press "Search". The results can be viewed as a Web page or downloaded as a VOTable or text file.

Questions: Does the
ICS produce the information that you expect? Are there instruments that should be added? Do you see any errors in the Service? If there are any problems, please let us know.

Heliophysics Feature Catalogue

The Heliophysics Feature Catalogue holds information derived by using feature recognition codes on images, etc. at various wavelengths. The features currently included in the catalogue are sunspots, active regions, filaments and coronal holes identified in solar images and type II and III radio bursts detected in time/frequency plots.

The
HFC contains three different types/levels of information:

  1. Level I data includes the information derived from the image processing routines describing the location and outline of features.
  2. To produce the level II data, features detected in the level I data are tracked and the catalogue can be used to determine if a feature seen in one image is the same as the feature seen in subsequent image.
  3. The level III catalogue is derived from the level II data and shows where things have happened. For example, if a segment of filament disappears or a group of sunspots emerges. This catalogue is more analogous to an event catalogue and some of the data in the level III data is similar to lists in the HEC.
To use the HFC, select a time range of interest and the desired feature list and then press "Submit".

The HFC catalogue and interface are still under development. Currently only level I data are available; the exact contents of the level III catalogue are still being defined.

Heliophysics Event Catalogue

The Heliophysics Event Catalogue contains lists that show various types of events produced by a number of different organisations. The lists represent observations of events caused by different types of phenomena and include flares, coronal mass ejections and other disturbances in the solar wind, effects on the Earth's environment, etc.

To use the HEC, select a time range of interest and the desired event list and then press "Search". The results can be viewed as a Web page or downloaded as a VOTable or text file.

We are always interested in adding more event lists to the HEC. If you know of other interesting lists please let us know.

A new interface is currently being evaluated for the HEC.